After some waiting and anticipation, the Quansheng UV-K10 Pro has been released. It is now available to purchase, and the price is on point with radios from other brands that have similar specifications. This Quansheng UV-K10 Pro is basically a normal Quansheng from the K series, but with 10 Watts of transmit power, Bluetooth programming, GPS and APRS, and has had the HF Si4732 board mod already done. And as a result it does have two antenna connections. This is excellent because so many people have wanted these extra features out-the-box for a long time now. Wider frequency range, more transmit power output etc. So with the K10 Pro, its all packed into one radio.
The basic specification is as follows. Transmit Frequency (VHF) 136MHz–174MHz / Transmit Frequency (UHF) 350MHz-490MHz. Standard antenna slot receiving range 30–580MHz. Secondary antenna slot Si4732 receiving range 0.153–580MHz [HF short wave, medium wave]. APRS, GPS [with positioning], Emergency alarm, spectrum analyzer, 999 channels, Bluetooth programming, USB type-C programming, 10 NOAA weather alert channels, 2500mAh battery. Receiving modes consist of: AM, FM, SSB and CW.
No full colour screen unfortunately, but apparently the screen can be changed to other full colours other than the orange / amber backlight. Also, I believe the battery can be charged alone and does not need to be attached to the radio. I am unsure at this point if the K10 is compatible with modified software such as Egzumer and F4HWN.
However, with how regularly updated F4HWN firmware is [thanks Armel], I would think that there should be no problems installing new versions of F4HWN unless Quansheng have dramatically changed something internally on their end. When more information becomes available I will update this post. If you’re looking a new but non-HF Si4732 version, check out the UV-K1 (9). A great little radio, and much cheaper [but less features of course] than the K10 Pro.
